Pipestar Australia Pty Ltd - Polyethylene Sweep Bends
This Appraisal applies to polyethylene sweep bends with SDR ratings from 7.4 to 21 in sizes from DN 20 to DN 800 and angles ranging from 11 degrees to 90 degrees.
The bends are manufactured in one continuous piece from PE 100 pressure pipe and incorporate long spigots suitable for butt welding or electrofusion joints. The radius of curvature is approximately 3 x diameter.
Polyethylene Sweep Bends
Pipestar Australia Pty Ltd
AS/NZS 4129: 2008 Fittings for polyethylene (PE) pipes for pressure applications.